| Geant4 Cross Reference |
1 // 1 //
2 // ******************************************* 2 // ********************************************************************
3 // * License and Disclaimer 3 // * License and Disclaimer *
4 // * 4 // * *
5 // * The Geant4 software is copyright of th 5 // * The Geant4 software is copyright of the Copyright Holders of *
6 // * the Geant4 Collaboration. It is provided 6 // * the Geant4 Collaboration. It is provided under the terms and *
7 // * conditions of the Geant4 Software License 7 // * conditions of the Geant4 Software License, included in the file *
8 // * LICENSE and available at http://cern.ch/ 8 // * LICENSE and available at http://cern.ch/geant4/license . These *
9 // * include a list of copyright holders. 9 // * include a list of copyright holders. *
10 // * 10 // * *
11 // * Neither the authors of this software syst 11 // * Neither the authors of this software system, nor their employing *
12 // * institutes,nor the agencies providing fin 12 // * institutes,nor the agencies providing financial support for this *
13 // * work make any representation or warran 13 // * work make any representation or warranty, express or implied, *
14 // * regarding this software system or assum 14 // * regarding this software system or assume any liability for its *
15 // * use. Please see the license in the file 15 // * use. Please see the license in the file LICENSE and URL above *
16 // * for the full disclaimer and the limitatio 16 // * for the full disclaimer and the limitation of liability. *
17 // * 17 // * *
18 // * This code implementation is the result 18 // * This code implementation is the result of the scientific and *
19 // * technical work of the GEANT4 collaboratio 19 // * technical work of the GEANT4 collaboration. *
20 // * By using, copying, modifying or distri 20 // * By using, copying, modifying or distributing the software (or *
21 // * any work based on the software) you ag 21 // * any work based on the software) you agree to acknowledge its *
22 // * use in resulting scientific publicati 22 // * use in resulting scientific publications, and indicate your *
23 // * acceptance of all terms of the Geant4 Sof 23 // * acceptance of all terms of the Geant4 Software license. *
24 // ******************************************* 24 // ********************************************************************
25 // 25 //
26 // This is the *BASIC* version of IORT, a Gean 26 // This is the *BASIC* version of IORT, a Geant4-based application
27 // 27 //
28 // Main Authors: G.Russo(a,b), C.Casarino*(c), 28 // Main Authors: G.Russo(a,b), C.Casarino*(c), G.C. Candiano(c), G.A.P. Cirrone(d), F.Romano(d)
29 // Contributor Authors: S.Guatelli(e) 29 // Contributor Authors: S.Guatelli(e)
30 // Past Authors: G.Arnetta(c), S.E.Mazzaglia(d 30 // Past Authors: G.Arnetta(c), S.E.Mazzaglia(d)
31 // 31 //
32 // (a) Fondazione Istituto San Raffaele G.Gi 32 // (a) Fondazione Istituto San Raffaele G.Giglio, Cefalù, Italy
33 // (b) IBFM-CNR , Segrate (Milano), Italy 33 // (b) IBFM-CNR , Segrate (Milano), Italy
34 // (c) LATO (Laboratorio di Tecnologie Oncol 34 // (c) LATO (Laboratorio di Tecnologie Oncologiche), Cefalù, Italy
35 // (d) Laboratori Nazionali del Sud of the I 35 // (d) Laboratori Nazionali del Sud of the INFN, Catania, Italy
36 // (e) University of Wollongong, Australia 36 // (e) University of Wollongong, Australia
37 // 37 //
38 // *Corresponding author, email to carlo.cas 38 // *Corresponding author, email to carlo.casarino@polooncologicocefalu.it
39 ////////////////////////////////////////////// 39 //////////////////////////////////////////////////////////////////////////////////////////////
40 40
41 #include "globals.hh" 41 #include "globals.hh"
42 #include "G4SystemOfUnits.hh" 42 #include "G4SystemOfUnits.hh"
43 #include "G4Box.hh" 43 #include "G4Box.hh"
44 #include "G4Tubs.hh" 44 #include "G4Tubs.hh"
45 #include "G4Cons.hh" 45 #include "G4Cons.hh"
46 #include "G4VisAttributes.hh" 46 #include "G4VisAttributes.hh"
47 #include "G4Colour.hh" 47 #include "G4Colour.hh"
48 #include "G4RunManager.hh" 48 #include "G4RunManager.hh"
49 #include "G4LogicalVolume.hh" 49 #include "G4LogicalVolume.hh"
50 #include "G4PVPlacement.hh" 50 #include "G4PVPlacement.hh"
51 #include "G4RotationMatrix.hh" 51 #include "G4RotationMatrix.hh"
52 #include "G4NistManager.hh" 52 #include "G4NistManager.hh"
53 #include "G4NistElementBuilder.hh" 53 #include "G4NistElementBuilder.hh"
54 #include "G4SubtractionSolid.hh" 54 #include "G4SubtractionSolid.hh"
55 #include "IORTDetectorConstruction.hh" 55 #include "IORTDetectorConstruction.hh"
56 #include "Collimator60BeamLine.hh" 56 #include "Collimator60BeamLine.hh"
57 #include "Collimator60BeamLineMessenger.hh" 57 #include "Collimator60BeamLineMessenger.hh"
58 58
59 Collimator60BeamLine::Collimator60BeamLine(): 59 Collimator60BeamLine::Collimator60BeamLine():
60 physicalTreatmentRoom(0),iortDetectorConstru 60 physicalTreatmentRoom(0),iortDetectorConstruction(0),
61 61
62 62
63 63
64 solidFinalCollimatorIORT(0), 64 solidFinalCollimatorIORT(0),
65 physiFinalCollimatorIORT(0), 65 physiFinalCollimatorIORT(0),
66 66
67 solidGiunz1FinalCollIORT(0), 67 solidGiunz1FinalCollIORT(0),
68 physiGiunz1FinalCollIORT(0), 68 physiGiunz1FinalCollIORT(0),
69 69
70 solidGiunz2FinalCollIORT(0), 70 solidGiunz2FinalCollIORT(0),
71 physiGiunz2FinalCollIORT(0), 71 physiGiunz2FinalCollIORT(0),
72 72
73 solidGiunz3FinalCollIORT(0), 73 solidGiunz3FinalCollIORT(0),
74 physiGiunz3FinalCollIORT(0), 74 physiGiunz3FinalCollIORT(0),
75 75
76 solidGiunz3FinalCollIntIORT(0), 76 solidGiunz3FinalCollIntIORT(0),
77 physiGiunz3FinalCollIntIORT(0), 77 physiGiunz3FinalCollIntIORT(0),
78 78
79 solidGiunz4FinalCollIORT(0), 79 solidGiunz4FinalCollIORT(0),
80 physiGiunz4FinalCollIORT(0), 80 physiGiunz4FinalCollIORT(0),
81 81
82 solidGiunz5FinalCollIORT(0), 82 solidGiunz5FinalCollIORT(0),
83 physiGiunz5FinalCollIORT(0), 83 physiGiunz5FinalCollIORT(0),
84 84
85 solidBlocco1IORT(0), 85 solidBlocco1IORT(0),
86 physiBlocco1IORT(0), 86 physiBlocco1IORT(0),
87 87
88 solidBlocco2IORT(0), 88 solidBlocco2IORT(0),
89 physiBlocco2IORT(0), 89 physiBlocco2IORT(0),
90 90
91 solidBlocco3IORT(0), 91 solidBlocco3IORT(0),
92 physiBlocco3IORT(0), 92 physiBlocco3IORT(0),
93 93
94 solidBlocco20mmIORT(0), 94 solidBlocco20mmIORT(0),
95 physiBlocco20mmIORT(0), 95 physiBlocco20mmIORT(0),
96 96
97 solidCM1_1_2IORT(0), 97 solidCM1_1_2IORT(0),
98 physiCM1_1_2IORT(0), 98 physiCM1_1_2IORT(0),
99 99
100 solidCM1_2_2IORT(0), 100 solidCM1_2_2IORT(0),
101 physiCM1_2_2IORT(0), 101 physiCM1_2_2IORT(0),
102 102
103 solidCM2_1_2IORT(0), 103 solidCM2_1_2IORT(0),
104 physiCM2_1_2IORT(0), 104 physiCM2_1_2IORT(0),
105 105
106 solidCM2_2_2IORT(0), 106 solidCM2_2_2IORT(0),
107 physiCM2_2_2IORT(0), 107 physiCM2_2_2IORT(0),
108 108
109 solidCCMIORT(0), 109 solidCCMIORT(0),
110 physiCCMIORT(0), 110 physiCCMIORT(0),
111 111
112 solidPFS1IORT(0), 112 solidPFS1IORT(0),
113 physiPFS1IORT(0), 113 physiPFS1IORT(0),
114 114
115 solidPFS2IORT(0), 115 solidPFS2IORT(0),
116 physiPFS2IORT(0), 116 physiPFS2IORT(0),
117 117
118 solidPFS3IORT(0), 118 solidPFS3IORT(0),
119 physiPFS3IORT(0), 119 physiPFS3IORT(0),
120 120
121 solidFTIORT(0), 121 solidFTIORT(0),
122 physiFTIORT(0) 122 physiFTIORT(0)
123 123
124 124
125 { 125 {
126 // Messenger to change parameters of the col 126 // Messenger to change parameters of the collimator60BeamLine geometry
127 collimatorMessenger = new Collimator60BeamLi 127 collimatorMessenger = new Collimator60BeamLineMessenger(this);
128 128
129 } 129 }
130 ////////////////////////////////////////////// 130 /////////////////////////////////////////////////////////////////////////////
131 Collimator60BeamLine::~Collimator60BeamLine() 131 Collimator60BeamLine::~Collimator60BeamLine()
132 { 132 {
133 delete collimatorMessenger; 133 delete collimatorMessenger;
134 delete iortDetectorConstruction; 134 delete iortDetectorConstruction;
135 } 135 }
136 136
137 ////////////////////////////////////////////// 137 /////////////////////////////////////////////////////////////////////////////
138 138
139 139
140 G4VPhysicalVolume* Collimator60BeamLine::Const 140 G4VPhysicalVolume* Collimator60BeamLine::Construct()
141 { 141 {
142 // Sets default geometry and materials 142 // Sets default geometry and materials
143 SetDefaultDimensions(); 143 SetDefaultDimensions();
144 144
145 // Construct the whole Collimator Beam Line 145 // Construct the whole Collimator Beam Line
146 ConstructCollimator60BeamLine(); 146 ConstructCollimator60BeamLine();
147 147
148 148
149 // IORTDetectorConstruction builds ONLY the 149 // IORTDetectorConstruction builds ONLY the phantom and the detector with its associated ROGeometry
150 iortDetectorConstruction = new IORTDetectorC 150 iortDetectorConstruction = new IORTDetectorConstruction(physicalTreatmentRoom);
151 151
152 return physicalTreatmentRoom; 152 return physicalTreatmentRoom;
153 } 153 }
154 154
155 // In the following method the DEFAULTS used i 155 // In the following method the DEFAULTS used in the geometry of
156 // collimator beam line are provided 156 // collimator beam line are provided
157 // HERE THE USER CAN CHANGE THE GEOMETRY CHARA 157 // HERE THE USER CAN CHANGE THE GEOMETRY CHARACTERISTICS OF BEAM
158 // LINE ELEMENTS, ALTERNATIVELY HE/SHE CAN USE 158 // LINE ELEMENTS, ALTERNATIVELY HE/SHE CAN USE THE MACRO FILE (IF A
159 // MESSENGER IS PROVIDED) 159 // MESSENGER IS PROVIDED)
160 // 160 //
161 // DEFAULT MATERIAL ARE ALSO PROVIDED 161 // DEFAULT MATERIAL ARE ALSO PROVIDED
162 // and COLOURS ARE ALSO DEFINED 162 // and COLOURS ARE ALSO DEFINED
163 // ------------------------------------------- 163 // ----------------------------------------------------------
164 ////////////////////////////////////////////// 164 /////////////////////////////////////////////////////////////////////////////
165 void Collimator60BeamLine::SetDefaultDimension 165 void Collimator60BeamLine::SetDefaultDimensions()
166 { 166 {
167 167
168 // Set of coulors that can be used 168 // Set of coulors that can be used
169 white = new G4VisAttributes( G4Colour()); 169 white = new G4VisAttributes( G4Colour());
170 white -> SetVisibility(true); 170 white -> SetVisibility(true);
171 //white -> SetForceSolid(true); 171 //white -> SetForceSolid(true);
172 172
173 blue = new G4VisAttributes(G4Colour(0. ,0. , 173 blue = new G4VisAttributes(G4Colour(0. ,0. ,1.));
174 blue -> SetVisibility(true); 174 blue -> SetVisibility(true);
175 //blue -> SetForceSolid(true); 175 //blue -> SetForceSolid(true);
176 176
177 gray = new G4VisAttributes( G4Colour(0.5, 0. 177 gray = new G4VisAttributes( G4Colour(0.5, 0.5, 0.5 ));
178 gray-> SetVisibility(true); 178 gray-> SetVisibility(true);
179 //gray-> SetForceSolid(true); 179 //gray-> SetForceSolid(true);
180 180
181 red = new G4VisAttributes(G4Colour(1. ,0. ,0 181 red = new G4VisAttributes(G4Colour(1. ,0. ,0.));
182 red-> SetVisibility(true); 182 red-> SetVisibility(true);
183 //red-> SetForceSolid(true); 183 //red-> SetForceSolid(true);
184 184
185 yellow = new G4VisAttributes(G4Colour(1., 1. 185 yellow = new G4VisAttributes(G4Colour(1., 1., 0. ));
186 yellow-> SetVisibility(true); 186 yellow-> SetVisibility(true);
187 //yellow-> SetForceSolid(true); 187 //yellow-> SetForceSolid(true);
188 188
189 green = new G4VisAttributes( G4Colour(25/255 189 green = new G4VisAttributes( G4Colour(25/255. , 255/255. , 25/255. ));
190 green -> SetVisibility(true); 190 green -> SetVisibility(true);
191 //green -> SetForceSolid(true); 191 //green -> SetForceSolid(true);
192 192
193 darkGreen = new G4VisAttributes( G4Colour(0/ 193 darkGreen = new G4VisAttributes( G4Colour(0/255. , 100/255. , 0/255. ));
194 darkGreen -> SetVisibility(true); 194 darkGreen -> SetVisibility(true);
195 //darkGreen -> SetForceSolid(true); 195 //darkGreen -> SetForceSolid(true);
196 196
197 darkOrange3 = new G4VisAttributes( G4Colour( 197 darkOrange3 = new G4VisAttributes( G4Colour(205/255. , 102/255. , 000/255. ));
198 darkOrange3 -> SetVisibility(true); 198 darkOrange3 -> SetVisibility(true);
199 //darkOrange3 -> SetForceSolid(true); 199 //darkOrange3 -> SetForceSolid(true);
200 200
201 skyBlue = new G4VisAttributes( G4Colour(135/ 201 skyBlue = new G4VisAttributes( G4Colour(135/255. , 206/255. , 235/255. ));
202 skyBlue -> SetVisibility(true); 202 skyBlue -> SetVisibility(true);
203 //skyBlue -> SetForceSolid(true); 203 //skyBlue -> SetForceSolid(true);
204 204
205 205
206 206
207 // Geometry FINAL COLLIMATOR DEFAULTS 207 // Geometry FINAL COLLIMATOR DEFAULTS
208 208
209 G4double defaultOuterRadiusFinalCollimatorIO 209 G4double defaultOuterRadiusFinalCollimatorIORT = 35. *mm;
210 OuterRadiusFinalCollimatorIORT = defaultOute 210 OuterRadiusFinalCollimatorIORT = defaultOuterRadiusFinalCollimatorIORT;
211 211
212 G4double defaultinnerRadiusFinalCollimatorIO 212 G4double defaultinnerRadiusFinalCollimatorIORT = 30. *mm;
213 innerRadiusFinalCollimatorIORT = defaultinne 213 innerRadiusFinalCollimatorIORT = defaultinnerRadiusFinalCollimatorIORT;
214 214
215 // DEFAULT DEFINITION OF THE MATERIALS 215 // DEFAULT DEFINITION OF THE MATERIALS
216 // All elements and compound definition foll 216 // All elements and compound definition follows the NIST database
217 217
218 // ELEMENTS 218 // ELEMENTS
219 G4bool isotopes = false; 219 G4bool isotopes = false;
220 G4Material* aluminumNist = G4NistManager::In 220 G4Material* aluminumNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Al", isotopes);
221 //G4Material* tantalumNist = G4NistManager:: 221 //G4Material* tantalumNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Ta", isotopes);
222 //G4Material* copperNistAsMaterial = G4NistM 222 //G4Material* copperNistAsMaterial = G4NistManager::Instance()->FindOrBuildMaterial("G4_Cu", isotopes);
223 G4Element* zincNist = G4NistManager::Instanc 223 G4Element* zincNist = G4NistManager::Instance()->FindOrBuildElement("Zn");
224 G4Element* copperNist = G4NistManager::Insta 224 G4Element* copperNist = G4NistManager::Instance()->FindOrBuildElement("Cu");
225 225
226 // COMPOUND 226 // COMPOUND
227 G4Material* airNist = G4NistManager::Instan 227 G4Material* airNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_AIR", isotopes);
228 //G4Material* kaptonNist = G4NistManager::In 228 //G4Material* kaptonNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_KAPTON", isotopes);
229 G4Material* galacticNist = G4NistManager::In 229 G4Material* galacticNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Galactic", isotopes);
230 G4Material* PMMANist = G4NistManager::Instan 230 G4Material* PMMANist = G4NistManager::Instance()->FindOrBuildMaterial("G4_PLEXIGLASS", isotopes);
231 //G4Material* mylarNist = G4NistManager::Ins 231 //G4Material* mylarNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_MYLAR", isotopes);
232 G4Material* titanioNist = G4NistManager::Ins 232 G4Material* titanioNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_Ti", isotopes);
233 233
234 234
235 G4double d; // Density 235 G4double d; // Density
236 G4int nComponents;// Number of components 236 G4int nComponents;// Number of components
237 G4double fractionmass; // Fraction in mass o 237 G4double fractionmass; // Fraction in mass of an element in a material
238 238
239 d = 8.40*g/cm3; // brass 239 d = 8.40*g/cm3; // brass
240 nComponents = 2; 240 nComponents = 2;
241 G4Material* brass = new G4Material("Brass", 241 G4Material* brass = new G4Material("Brass", d, nComponents);
242 brass -> AddElement(zincNist, fractionmass = 242 brass -> AddElement(zincNist, fractionmass = 30 *perCent);
243 brass -> AddElement(copperNist, fractionmass 243 brass -> AddElement(copperNist, fractionmass = 70 *perCent);
244 244
245 245
246 // MATERIAL ASSIGNMENT 246 // MATERIAL ASSIGNMENT
247 247
248 248
249 // Material of the FINAL COLLIMATOR IORT 249 // Material of the FINAL COLLIMATOR IORT
250 finalCollimatorMaterialIORT = PMMANist; 250 finalCollimatorMaterialIORT = PMMANist;
251 251
252 // Junction 1 FINAL COLLIMATOR IORT 252 // Junction 1 FINAL COLLIMATOR IORT
253 Giunz1FinalCollMaterialIORT = PMMANist; 253 Giunz1FinalCollMaterialIORT = PMMANist;
254 254
255 // Junction 2 FINAL COLLIMATOR IORT 255 // Junction 2 FINAL COLLIMATOR IORT
256 Giunz2FinalCollMaterialIORT = PMMANist; 256 Giunz2FinalCollMaterialIORT = PMMANist;
257 257
258 // Junction 3 FINAL COLLIMATOR IORT 258 // Junction 3 FINAL COLLIMATOR IORT
259 Giunz3FinalCollMaterialIORT = PMMANist; 259 Giunz3FinalCollMaterialIORT = PMMANist;
260 260
261 // Junction 3 FINAL COLLIMATOR Int IORT 261 // Junction 3 FINAL COLLIMATOR Int IORT
262 Giunz3FinalCollMaterialIntIORT = airNist; 262 Giunz3FinalCollMaterialIntIORT = airNist;
263 263
264 // Junction 4 FINAL COLLIMATOR IORT 264 // Junction 4 FINAL COLLIMATOR IORT
265 Giunz4FinalCollMaterialIORT = PMMANist; 265 Giunz4FinalCollMaterialIORT = PMMANist;
266 266
267 // Junction 5 FINAL COLLIMATOR IORT 267 // Junction 5 FINAL COLLIMATOR IORT
268 Giunz5FinalCollMaterialIORT = PMMANist; 268 Giunz5FinalCollMaterialIORT = PMMANist;
269 269
270 // Block 1 Diameter 30 mm 270 // Block 1 Diameter 30 mm
271 Blocco1IORTMaterialIORT = PMMANist; 271 Blocco1IORTMaterialIORT = PMMANist;
272 272
273 // Block 2 Diameter 30 mm 273 // Block 2 Diameter 30 mm
274 Blocco2IORTMaterialIORT = PMMANist; 274 Blocco2IORTMaterialIORT = PMMANist;
275 275
276 // Block 3 Diameter 30 mm 276 // Block 3 Diameter 30 mm
277 Blocco3IORTMaterialIORT = PMMANist; 277 Blocco3IORTMaterialIORT = PMMANist;
278 278
279 // Block Diameter 20 mm 279 // Block Diameter 20 mm
280 Blocco20mmIORTMaterialIORT = PMMANist; 280 Blocco20mmIORTMaterialIORT = PMMANist;
281 281
282 // First Monitor Chamber Lamina Al 1 of 2 282 // First Monitor Chamber Lamina Al 1 of 2
283 CM1_1_2IORTMaterialIORT = aluminumNist; 283 CM1_1_2IORTMaterialIORT = aluminumNist;
284 284
285 // First Monitor Chamber Lamina Al 2 of 2 285 // First Monitor Chamber Lamina Al 2 of 2
286 CM1_2_2IORTMaterialIORT = aluminumNist; 286 CM1_2_2IORTMaterialIORT = aluminumNist;
287 287
288 // Second Monitor Chamber Lamina Al 1 of 2 288 // Second Monitor Chamber Lamina Al 1 of 2
289 CM2_1_2IORTMaterialIORT = aluminumNist; 289 CM2_1_2IORTMaterialIORT = aluminumNist;
290 290
291 // Second Monitor Chamber Lamina Al 2 of 2 291 // Second Monitor Chamber Lamina Al 2 of 2
292 CM2_2_2IORTMaterialIORT = aluminumNist; 292 CM2_2_2IORTMaterialIORT = aluminumNist;
293 293
294 // Monitor Chamber Cylinder 294 // Monitor Chamber Cylinder
295 CCMIORTMaterialIORT = PMMANist; 295 CCMIORTMaterialIORT = PMMANist;
296 296
297 // Superior Final Part Monitor Chambers 297 // Superior Final Part Monitor Chambers
298 PFS1IORTMaterialIORT = PMMANist; 298 PFS1IORTMaterialIORT = PMMANist;
299 299
300 // Superior Final Part Monitor Chambers 300 // Superior Final Part Monitor Chambers
301 PFS2IORTMaterialIORT = PMMANist; 301 PFS2IORTMaterialIORT = PMMANist;
302 302
303 // Superior Final Part Monitor Chambers 303 // Superior Final Part Monitor Chambers
304 PFS3IORTMaterialIORT = PMMANist; 304 PFS3IORTMaterialIORT = PMMANist;
305 305
306 // Superior Final Part Monitor Chambers Mater 306 // Superior Final Part Monitor Chambers Material
307 FTIORTMaterialIORT = titanioNist; 307 FTIORTMaterialIORT = titanioNist;
308 308
309 // Vacuum Source 309 // Vacuum Source
310 VSIORTMaterialIORT = galacticNist; 310 VSIORTMaterialIORT = galacticNist;
311 311
312 } 312 }
313 313
314 ////////////////////////////////////////////// 314 /////////////////////////////////////////////////////////////////////////////
315 void Collimator60BeamLine::ConstructCollimator 315 void Collimator60BeamLine::ConstructCollimator60BeamLine()
316 { 316 {
317 // ----------------------------- 317 // -----------------------------
318 // Treatment room - World volume 318 // Treatment room - World volume
319 //------------------------------ 319 //------------------------------
320 // Treatment room sizes 320 // Treatment room sizes
321 const G4double worldX = 400.0 *cm; 321 const G4double worldX = 400.0 *cm;
322 const G4double worldY = 400.0 *cm; 322 const G4double worldY = 400.0 *cm;
323 const G4double worldZ = 400.0 *cm; 323 const G4double worldZ = 400.0 *cm;
324 G4bool isotopes = false; 324 G4bool isotopes = false;
325 325
326 G4Material* airNist = G4NistManager::Instan 326 G4Material* airNist = G4NistManager::Instance()->FindOrBuildMaterial("G4_AIR", isotopes);
327 G4Box* treatmentRoom = new G4Box("TreatmentR 327 G4Box* treatmentRoom = new G4Box("TreatmentRoom",worldX,worldY,worldZ);
328 G4LogicalVolume* logicTreatmentRoom = new G4 328 G4LogicalVolume* logicTreatmentRoom = new G4LogicalVolume(treatmentRoom,
329 329 airNist,
330 330 "logicTreatmentRoom",
331 0,0,0); 331 0,0,0);
332 physicalTreatmentRoom = new G4PVPlacement(0, 332 physicalTreatmentRoom = new G4PVPlacement(0,
333 G4ThreeVector(), 333 G4ThreeVector(),
334 "physicalTreatmentRoom", 334 "physicalTreatmentRoom",
335 logicTreatmentRoom, 335 logicTreatmentRoom,
336 0,false,0); 336 0,false,0);
337 337
338 338
339 // The treatment room is invisible in the Vi 339 // The treatment room is invisible in the Visualisation
340 logicTreatmentRoom -> SetVisAttributes (G4Vi 340 logicTreatmentRoom -> SetVisAttributes (G4VisAttributes::GetInvisible());
341 341
342 // Components of the Collimator Beam Line 342 // Components of the Collimator Beam Line
343 343
344 IortBeamLineVacuumSource(); 344 IortBeamLineVacuumSource();
345 IortBeamLineTitaniumWindows(); 345 IortBeamLineTitaniumWindows();
346 IortBeamLineMonitorChambers(); 346 IortBeamLineMonitorChambers();
347 IortBeamLineBlocks() ; 347 IortBeamLineBlocks() ;
348 IortBeamLineJunctions(); 348 IortBeamLineJunctions();
349 IortBeamLineFinalCollimator(); 349 IortBeamLineFinalCollimator();
350 350
351 } 351 }
352 352
353 353
354 void Collimator60BeamLine::IortBeamLineVacuumS 354 void Collimator60BeamLine::IortBeamLineVacuumSource()
355 { 355 {
356 // ------------------------------------------ 356 // ---------------------------------------------------------------//
357 // Vacuum Source 357 // Vacuum Source //
358 // ----------------------------------------- 358 // ---------------------------------------------------------------//
359 359
360 360
361 G4double phi1 = 90. *deg; 361 G4double phi1 = 90. *deg;
362 362
363 363
364 G4RotationMatrix rm1; 364 G4RotationMatrix rm1;
365 rm1.rotateY(phi1); 365 rm1.rotateY(phi1);
366 366
367 const G4double outRadiusVSIORT = 44.75 *mm; 367 const G4double outRadiusVSIORT = 44.75 *mm;
368 const G4double innRadiusVSIORT = 0.*mm; 368 const G4double innRadiusVSIORT = 0.*mm;
369 const G4double hightVSIORT = 1. *mm; 369 const G4double hightVSIORT = 1. *mm;
370 const G4double startAngleVSIORT = 0.*deg; 370 const G4double startAngleVSIORT = 0.*deg;
371 const G4double spanningAngleVSIORT = 360.*de 371 const G4double spanningAngleVSIORT = 360.*deg;
372 const G4double XPositionVSIORT = -862.797 *m 372 const G4double XPositionVSIORT = -862.797 *mm;
373 373
374 solidVSIORT = new G4Tubs("VSIORT", innRadius 374 solidVSIORT = new G4Tubs("VSIORT", innRadiusVSIORT,
375 outRadiusVSIORT, 375 outRadiusVSIORT,
376 hightVSIORT, 376 hightVSIORT,
377 startAngleVSIORT, 377 startAngleVSIORT,
378 spanningAngleVSIORT); 378 spanningAngleVSIORT);
379 379
380 G4LogicalVolume* logVSIORT = new G4LogicalVo 380 G4LogicalVolume* logVSIORT = new G4LogicalVolume(solidVSIORT,
381 VSIORTMaterialIORT, "VSIOR 381 VSIORTMaterialIORT, "VSIORT", 0, 0, 0);
382 382
383 physiVSIORT = new G4PVPlacement(G4Transform3 383 physiVSIORT = new G4PVPlacement(G4Transform3D(rm1, G4ThreeVector((XPositionVSIORT),0.,0.)),
384 "VSIORT", logVSIORT, physicalTrea 384 "VSIORT", logVSIORT, physicalTreatmentRoom, false, 0);
385 385
386 logVSIORT -> SetVisAttributes(green); 386 logVSIORT -> SetVisAttributes(green);
387 387
388 } 388 }
389 389
390 void Collimator60BeamLine::IortBeamLineTitaniu 390 void Collimator60BeamLine::IortBeamLineTitaniumWindows()
391 { 391 {
392 // ------------------------------------------- 392 // ---------------------------------------------------------------//
393 // Titanium Window 393 // Titanium Window //
394 // ----------------------------------------- 394 // ---------------------------------------------------------------//
395 395
396 G4double phi2 = 90. *deg; 396 G4double phi2 = 90. *deg;
397 397
398 398
399 G4RotationMatrix rm2; 399 G4RotationMatrix rm2;
400 rm2.rotateY(phi2); 400 rm2.rotateY(phi2);
401 401
402 const G4double outRadiusFTIORT = 44.75 *mm; 402 const G4double outRadiusFTIORT = 44.75 *mm;
403 const G4double innRadiusFTIORT = 8.5 *mm; 403 const G4double innRadiusFTIORT = 8.5 *mm;
404 const G4double hightFTIORT = 0.006 *mm; 404 const G4double hightFTIORT = 0.006 *mm;
405 const G4double startAngleFTIORT = 0.*deg; 405 const G4double startAngleFTIORT = 0.*deg;
406 const G4double spanningAngleFTIORT = 360.*de 406 const G4double spanningAngleFTIORT = 360.*deg;
407 const G4double XPositionFTIORT = -861.791 *m 407 const G4double XPositionFTIORT = -861.791 *mm;
408 408
409 solidFTIORT = new G4Tubs("FTIORT", innRadius 409 solidFTIORT = new G4Tubs("FTIORT", innRadiusFTIORT,
410 outRadiusFTIORT, 410 outRadiusFTIORT,
411 hightFTIORT, 411 hightFTIORT,
412 startAngleFTIORT, 412 startAngleFTIORT,
413 spanningAngleFTIORT); 413 spanningAngleFTIORT);
414 414
415 G4LogicalVolume* logFTIORT = new G4LogicalVo 415 G4LogicalVolume* logFTIORT = new G4LogicalVolume(solidFTIORT,
416 FTIORTMaterialIORT, "FTIOR 416 FTIORTMaterialIORT, "FTIORT", 0, 0, 0);
417 417
418 physiFTIORT = new G4PVPlacement(G4Transform3 418 physiFTIORT = new G4PVPlacement(G4Transform3D(rm2, G4ThreeVector((XPositionFTIORT),0.,0.)),
419 "FTIORT", logFTIORT, physicalTrea 419 "FTIORT", logFTIORT, physicalTreatmentRoom, false, 0);
420 420
421 logFTIORT -> SetVisAttributes(yellow); 421 logFTIORT -> SetVisAttributes(yellow);
422 } 422 }
423 423
424 void Collimator60BeamLine::IortBeamLineMonitor 424 void Collimator60BeamLine::IortBeamLineMonitorChambers()
425 { 425 {
426 426
427 G4double phi3 = 90. *deg; 427 G4double phi3 = 90. *deg;
428 428
429 // Matrix definition for a 90 deg rotatio 429 // Matrix definition for a 90 deg rotation. Also used for other volumes
430 G4RotationMatrix rm3; 430 G4RotationMatrix rm3;
431 rm3.rotateY(phi3); 431 rm3.rotateY(phi3);
432 ////////////////////////////////////////////// 432 ///////////////////////////////////////////////////////////////////////////////
433 433
434 // Monitor Chambers System 434 // Monitor Chambers System
435 435
436 ////////////////////////////////////////////// 436 ///////////////////////////////////////////////////////////////////////////////
437 437
438 438
439 // ----------------------------------------- 439 // ---------------------------------------------------------------//
440 // Superior Final Part Monitor C 440 // Superior Final Part Monitor Chambers 3 //
441 // ----------------------------------------- 441 // ---------------------------------------------------------------//
442 442
443 const G4double outRadiusPFS3IORT = 44.75 *mm 443 const G4double outRadiusPFS3IORT = 44.75 *mm;
444 const G4double innRadiusPFS3IORT = 17.5 *mm; 444 const G4double innRadiusPFS3IORT = 17.5 *mm;
445 const G4double hightPFS3IORT = 3.03 *mm; 445 const G4double hightPFS3IORT = 3.03 *mm;
446 const G4double startAnglePFS3IORT = 0.*deg; 446 const G4double startAnglePFS3IORT = 0.*deg;
447 const G4double spanningAnglePFS3IORT = 360.* 447 const G4double spanningAnglePFS3IORT = 360.*deg;
448 const G4double XPositionPFS3IORT = -848.755 448 const G4double XPositionPFS3IORT = -848.755 *mm;
449 449
450 solidPFS3IORT = new G4Tubs("PFS3IORT", innRa 450 solidPFS3IORT = new G4Tubs("PFS3IORT", innRadiusPFS3IORT,
451 outRadiusPFS3IORT, 451 outRadiusPFS3IORT,
452 hightPFS3IORT, 452 hightPFS3IORT,
453 startAnglePFS3IORT, 453 startAnglePFS3IORT,
454 spanningAnglePFS3IORT); 454 spanningAnglePFS3IORT);
455 455
456 G4LogicalVolume* logPFS3IORT = new G4Logical 456 G4LogicalVolume* logPFS3IORT = new G4LogicalVolume(solidPFS3IORT,
457 PFS3IORTMaterialIORT, "PFS 457 PFS3IORTMaterialIORT, "PFS3IORT", 0, 0, 0);
458 458
459 physiPFS3IORT = new G4PVPlacement(G4Transfor 459 physiPFS3IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS3IORT),0.,0.)),
460 "PFS3IORT", logPFS3IORT, physical 460 "PFS3IORT", logPFS3IORT, physicalTreatmentRoom, false, 0);
461 461
462 logPFS3IORT -> SetVisAttributes(white); 462 logPFS3IORT -> SetVisAttributes(white);
463 463
464 464
465 // ----------------------------------------- 465 // ---------------------------------------------------------------//
466 // Superior Final Part Monitor C 466 // Superior Final Part Monitor Chambers 2 //
467 // ----------------------------------------- 467 // ---------------------------------------------------------------//
468 468
469 const G4double outRadiusPFS2IORT = 44.75 *mm 469 const G4double outRadiusPFS2IORT = 44.75 *mm;
470 const G4double innRadiusPFS2IORT = 10. *mm; 470 const G4double innRadiusPFS2IORT = 10. *mm;
471 const G4double hightPFS2IORT = 1.47 *mm; 471 const G4double hightPFS2IORT = 1.47 *mm;
472 const G4double startAnglePFS2IORT = 0.*deg; 472 const G4double startAnglePFS2IORT = 0.*deg;
473 const G4double spanningAnglePFS2IORT = 360.* 473 const G4double spanningAnglePFS2IORT = 360.*deg;
474 const G4double XPositionPFS2IORT = -844.255 474 const G4double XPositionPFS2IORT = -844.255 *mm;
475 475
476 solidPFS2IORT = new G4Tubs("PFS2IORT", innRa 476 solidPFS2IORT = new G4Tubs("PFS2IORT", innRadiusPFS2IORT,
477 outRadiusPFS2IORT, 477 outRadiusPFS2IORT,
478 hightPFS2IORT, 478 hightPFS2IORT,
479 startAnglePFS2IORT, 479 startAnglePFS2IORT,
480 spanningAnglePFS2IORT); 480 spanningAnglePFS2IORT);
481 481
482 G4LogicalVolume* logPFS2IORT = new G4Logical 482 G4LogicalVolume* logPFS2IORT = new G4LogicalVolume(solidPFS2IORT,
483 PFS2IORTMaterialIORT, "PFS 483 PFS2IORTMaterialIORT, "PFS2IORT", 0, 0, 0);
484 484
485 physiPFS2IORT = new G4PVPlacement(G4Transfor 485 physiPFS2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS2IORT),0.,0.)),
486 "PFS2IORT", logPFS2IORT, physical 486 "PFS2IORT", logPFS2IORT, physicalTreatmentRoom, false, 0);
487 487
488 logPFS2IORT -> SetVisAttributes(green); 488 logPFS2IORT -> SetVisAttributes(green);
489 489
490 // ----------------------------------------- 490 // ---------------------------------------------------------------//
491 // Superior Final Part Monitor C 491 // Superior Final Part Monitor Chambers 1 //
492 // ----------------------------------------- 492 // ---------------------------------------------------------------//
493 493
494 const G4double outRadiusPFS1IORT = 35. *mm; 494 const G4double outRadiusPFS1IORT = 35. *mm;
495 const G4double innRadiusPFS1IORT = 10. *mm; 495 const G4double innRadiusPFS1IORT = 10. *mm;
496 const G4double hightPFS1IORT = 0.88 *mm; 496 const G4double hightPFS1IORT = 0.88 *mm;
497 const G4double startAnglePFS1IORT = 0.*deg; 497 const G4double startAnglePFS1IORT = 0.*deg;
498 const G4double spanningAnglePFS1IORT = 360.* 498 const G4double spanningAnglePFS1IORT = 360.*deg;
499 const G4double XPositionPFS1IORT = -841.905 499 const G4double XPositionPFS1IORT = -841.905 *mm;
500 500
501 solidPFS1IORT = new G4Tubs("PFS1IORT", innRa 501 solidPFS1IORT = new G4Tubs("PFS1IORT", innRadiusPFS1IORT,
502 outRadiusPFS1IORT, 502 outRadiusPFS1IORT,
503 hightPFS1IORT, 503 hightPFS1IORT,
504 startAnglePFS1IORT, 504 startAnglePFS1IORT,
505 spanningAnglePFS1IORT); 505 spanningAnglePFS1IORT);
506 506
507 G4LogicalVolume* logPFS1IORT = new G4Logical 507 G4LogicalVolume* logPFS1IORT = new G4LogicalVolume(solidPFS1IORT,
508 PFS1IORTMaterialIORT, "PFS 508 PFS1IORTMaterialIORT, "PFS1IORT", 0, 0, 0);
509 509
510 physiPFS1IORT = new G4PVPlacement(G4Transfor 510 physiPFS1IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionPFS1IORT),0.,0.)),
511 "PFS1IORT", logPFS1IORT, physical 511 "PFS1IORT", logPFS1IORT, physicalTreatmentRoom, false, 0);
512 512
513 logPFS1IORT -> SetVisAttributes(green); 513 logPFS1IORT -> SetVisAttributes(green);
514 514
515 // ----------------------------------------- 515 // ------------------------------------------------//
516 // Monitor Chambers Cylinder 516 // Monitor Chambers Cylinder //
517 // ----------------------------------------- 517 // ------------------------------------------------//
518 518
519 const G4double outRadiusCCMIORT = 35. *mm; 519 const G4double outRadiusCCMIORT = 35. *mm;
520 const G4double innRadiusCCMIORT = 10. *mm; 520 const G4double innRadiusCCMIORT = 10. *mm;
521 const G4double hightCCMIORT = 4.0125 *mm; 521 const G4double hightCCMIORT = 4.0125 *mm;
522 const G4double startAngleCCMIORT = 0.*deg; 522 const G4double startAngleCCMIORT = 0.*deg;
523 const G4double spanningAngleCCMIORT = 360.*d 523 const G4double spanningAngleCCMIORT = 360.*deg;
524 const G4double XPositionCCMIORT = -837.0125 524 const G4double XPositionCCMIORT = -837.0125 *mm;
525 525
526 solidCCMIORT = new G4Tubs("CCMIORT", innRadi 526 solidCCMIORT = new G4Tubs("CCMIORT", innRadiusCCMIORT,
527 outRadiusCCMIORT, 527 outRadiusCCMIORT,
528 hightCCMIORT, 528 hightCCMIORT,
529 startAngleCCMIORT, 529 startAngleCCMIORT,
530 spanningAngleCCMIORT); 530 spanningAngleCCMIORT);
531 531
532 G4LogicalVolume* logCCMIORT = new G4LogicalV 532 G4LogicalVolume* logCCMIORT = new G4LogicalVolume(solidCCMIORT,
533 CCMIORTMaterialIORT, "CCMI 533 CCMIORTMaterialIORT, "CCMIORT", 0, 0, 0);
534 534
535 physiCCMIORT = new G4PVPlacement(G4Transform 535 physiCCMIORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCCMIORT),0.,0.)),
536 "CCMIORT", logCCMIORT, physicalTr 536 "CCMIORT", logCCMIORT, physicalTreatmentRoom, false, 0);
537 537
538 logCCMIORT -> SetVisAttributes(green); 538 logCCMIORT -> SetVisAttributes(green);
539 539
540 540
541 // ----------------------------------------- 541 // ------------------------------------------------//
542 // Second Monitor Chamber Lamina Al 2 542 // Second Monitor Chamber Lamina Al 2 of 2 //
543 // ----------------------------------------- 543 // ------------------------------------------------//
544 544
545 const G4double outRadiusCM2_2_2IORT = 20. *m 545 const G4double outRadiusCM2_2_2IORT = 20. *mm;
546 const G4double innRadiusCM2_2_2IORT = 0. *mm 546 const G4double innRadiusCM2_2_2IORT = 0. *mm;
547 const G4double hightCM2_2_2IORT = 0.025 *mm; 547 const G4double hightCM2_2_2IORT = 0.025 *mm;
548 const G4double startAngleCM2_2_2IORT = 0.*de 548 const G4double startAngleCM2_2_2IORT = 0.*deg;
549 const G4double spanningAngleCM2_2_2IORT = 36 549 const G4double spanningAngleCM2_2_2IORT = 360.*deg;
550 const G4double XPositionCM2_2_2IORT = -841. 550 const G4double XPositionCM2_2_2IORT = -841. *mm;
551 551
552 solidCM2_2_2IORT = new G4Tubs("CM2_2_2IORT", 552 solidCM2_2_2IORT = new G4Tubs("CM2_2_2IORT", innRadiusCM2_2_2IORT,
553 outRadiusCM2_2_2IORT, 553 outRadiusCM2_2_2IORT,
554 hightCM2_2_2IORT, 554 hightCM2_2_2IORT,
555 startAngleCM2_2_2IORT, 555 startAngleCM2_2_2IORT,
556 spanningAngleCM2_2_2IORT); 556 spanningAngleCM2_2_2IORT);
557 557
558 G4LogicalVolume* logCM2_2_2IORT = new G4Logi 558 G4LogicalVolume* logCM2_2_2IORT = new G4LogicalVolume(solidCM2_2_2IORT,
559 CM2_2_2IORTMaterialIORT, " 559 CM2_2_2IORTMaterialIORT, "CM2_2_2IORT", 0, 0, 0);
560 560
561 physiCM2_2_2IORT = new G4PVPlacement(G4Trans 561 physiCM2_2_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM2_2_2IORT),0.,0.)),
562 "CM2_2_2ORT", logCM2_2_2IORT, phy 562 "CM2_2_2ORT", logCM2_2_2IORT, physicalTreatmentRoom, false, 0);
563 563
564 logCM2_2_2IORT -> SetVisAttributes(green); 564 logCM2_2_2IORT -> SetVisAttributes(green);
565 565
566 566
567 // ------------------------------------------- 567 // ------------------------------------------------//
568 // Second Monitor Chamber Lamina Al 1 568 // Second Monitor Chamber Lamina Al 1 of 2 //
569 // ----------------------------------------- 569 // ------------------------------------------------//
570 570
571 const G4double outRadiusCM2_1_2IORT = 20. *m 571 const G4double outRadiusCM2_1_2IORT = 20. *mm;
572 const G4double innRadiusCM2_1_2IORT = 0. *mm 572 const G4double innRadiusCM2_1_2IORT = 0. *mm;
573 const G4double hightCM2_1_2IORT = 0.025 *mm; 573 const G4double hightCM2_1_2IORT = 0.025 *mm;
574 const G4double startAngleCM2_1_2IORT = 0.*de 574 const G4double startAngleCM2_1_2IORT = 0.*deg;
575 const G4double spanningAngleCM2_1_2IORT = 36 575 const G4double spanningAngleCM2_1_2IORT = 360.*deg;
576 const G4double XPositionCM2_1_2IORT = -839. 576 const G4double XPositionCM2_1_2IORT = -839. *mm;
577 577
578 solidCM2_1_2IORT = new G4Tubs("CM2_1_2IORT", 578 solidCM2_1_2IORT = new G4Tubs("CM2_1_2IORT", innRadiusCM2_1_2IORT,
579 outRadiusCM2_1_2IORT, 579 outRadiusCM2_1_2IORT,
580 hightCM2_1_2IORT, 580 hightCM2_1_2IORT,
581 startAngleCM2_1_2IORT, 581 startAngleCM2_1_2IORT,
582 spanningAngleCM2_1_2IORT); 582 spanningAngleCM2_1_2IORT);
583 583
584 G4LogicalVolume* logCM2_1_2IORT = new G4Logi 584 G4LogicalVolume* logCM2_1_2IORT = new G4LogicalVolume(solidCM2_1_2IORT,
585 CM2_1_2IORTMaterialIORT, " 585 CM2_1_2IORTMaterialIORT, "CM2_1_2IORT", 0, 0, 0);
586 586
587 physiCM2_1_2IORT = new G4PVPlacement(G4Trans 587 physiCM2_1_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM2_1_2IORT),0.,0.)),
588 "CM2_1_2ORT", logCM2_1_2IORT, phy 588 "CM2_1_2ORT", logCM2_1_2IORT, physicalTreatmentRoom, false, 0);
589 589
590 logCM2_1_2IORT -> SetVisAttributes(yellow); 590 logCM2_1_2IORT -> SetVisAttributes(yellow);
591 591
592 // ----------------------------------------- 592 // ------------------------------------------------//
593 // First Monitor Chamber Lamina Al 2 593 // First Monitor Chamber Lamina Al 2 of 2 //
594 // ----------------------------------------- 594 // ------------------------------------------------//
595 595
596 const G4double outRadiusCM1_2_2IORT = 20. *m 596 const G4double outRadiusCM1_2_2IORT = 20. *mm;
597 const G4double innRadiusCM1_2_2IORT = 0. *mm 597 const G4double innRadiusCM1_2_2IORT = 0. *mm;
598 const G4double hightCM1_2_2IORT = 0.025 *mm; 598 const G4double hightCM1_2_2IORT = 0.025 *mm;
599 const G4double startAngleCM1_2_2IORT = 0.*de 599 const G4double startAngleCM1_2_2IORT = 0.*deg;
600 const G4double spanningAngleCM1_2_2IORT = 36 600 const G4double spanningAngleCM1_2_2IORT = 360.*deg;
601 const G4double XPositionCM1_2_2IORT = -837. 601 const G4double XPositionCM1_2_2IORT = -837. *mm;
602 602
603 solidCM1_2_2IORT = new G4Tubs("CM1_2_2IORT", 603 solidCM1_2_2IORT = new G4Tubs("CM1_2_2IORT", innRadiusCM1_2_2IORT,
604 outRadiusCM1_2_2IORT, 604 outRadiusCM1_2_2IORT,
605 hightCM1_2_2IORT, 605 hightCM1_2_2IORT,
606 startAngleCM1_2_2IORT, 606 startAngleCM1_2_2IORT,
607 spanningAngleCM1_2_2IORT); 607 spanningAngleCM1_2_2IORT);
608 608
609 G4LogicalVolume* logCM1_2_2IORT = new G4Logi 609 G4LogicalVolume* logCM1_2_2IORT = new G4LogicalVolume(solidCM1_2_2IORT,
610 CM1_2_2IORTMaterialIORT, "CM1_ 610 CM1_2_2IORTMaterialIORT, "CM1_2_2IORT", 0, 0, 0);
611 611
612 physiCM1_2_2IORT = new G4PVPlacement(G4Trans 612 physiCM1_2_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM1_2_2IORT),0.,0.)),
613 "CM1_2_2ORT", logCM1_2_2IORT, phy 613 "CM1_2_2ORT", logCM1_2_2IORT, physicalTreatmentRoom, false, 0);
614 614
615 logCM1_2_2IORT -> SetVisAttributes(yellow); 615 logCM1_2_2IORT -> SetVisAttributes(yellow);
616 616
617 // ----------------------------------------- 617 // ------------------------------------------------//
618 // First Monitor Chamber Lamina Al 1 618 // First Monitor Chamber Lamina Al 1 of 2 //
619 // ----------------------------------------- 619 // ------------------------------------------------//
620 620
621 const G4double outRadiusCM1_1_2IORT = 20. *m 621 const G4double outRadiusCM1_1_2IORT = 20. *mm;
622 const G4double innRadiusCM1_1_2IORT = 0. *mm 622 const G4double innRadiusCM1_1_2IORT = 0. *mm;
623 const G4double hightCM1_1_2IORT = 0.025 *mm; 623 const G4double hightCM1_1_2IORT = 0.025 *mm;
624 const G4double startAngleCM1_1_2IORT = 0.*de 624 const G4double startAngleCM1_1_2IORT = 0.*deg;
625 const G4double spanningAngleCM1_1_2IORT = 36 625 const G4double spanningAngleCM1_1_2IORT = 360.*deg;
626 const G4double XPositionCM1_1_2IORT = -835. 626 const G4double XPositionCM1_1_2IORT = -835. *mm;
627 627
628 solidCM1_1_2IORT = new G4Tubs("CM1_1_2IORT", 628 solidCM1_1_2IORT = new G4Tubs("CM1_1_2IORT", innRadiusCM1_1_2IORT,
629 outRadiusCM1_1_2IORT, 629 outRadiusCM1_1_2IORT,
630 hightCM1_1_2IORT, 630 hightCM1_1_2IORT,
631 startAngleCM1_1_2IORT, 631 startAngleCM1_1_2IORT,
632 spanningAngleCM1_1_2IORT); 632 spanningAngleCM1_1_2IORT);
633 633
634 G4LogicalVolume* logCM1_1_2IORT = new G4Logi 634 G4LogicalVolume* logCM1_1_2IORT = new G4LogicalVolume(solidCM1_1_2IORT,
635 CM1_1_2IORTMaterialIORT, " 635 CM1_1_2IORTMaterialIORT, "CM1_1_2IORT", 0, 0, 0);
636 636
637 physiCM1_1_2IORT = new G4PVPlacement(G4Trans 637 physiCM1_1_2IORT = new G4PVPlacement(G4Transform3D(rm3, G4ThreeVector((XPositionCM1_1_2IORT),0.,0.)),
638 "CM1_1_2ORT", logCM1_1_2IORT, phy 638 "CM1_1_2ORT", logCM1_1_2IORT, physicalTreatmentRoom, false, 0);
639 639
640 logCM1_1_2IORT -> SetVisAttributes(yellow); 640 logCM1_1_2IORT -> SetVisAttributes(yellow);
641 } 641 }
642 642
643 void Collimator60BeamLine::IortBeamLineBlocks( 643 void Collimator60BeamLine::IortBeamLineBlocks()
644 { 644 {
645 645
646 G4double phi4 = 90. *deg; 646 G4double phi4 = 90. *deg;
647 647
648 648
649 G4RotationMatrix rm4; 649 G4RotationMatrix rm4;
650 rm4.rotateY(phi4); 650 rm4.rotateY(phi4);
651 651
652 ////////////////////////////////////////////// 652 ///////////////////////////////////////////////////////////////////////////////
653 653
654 // IORT BEAM LINE BLOCKS 654 // IORT BEAM LINE BLOCKS
655 655
656 ////////////////////////////////////////////// 656 ///////////////////////////////////////////////////////////////////////////////
657 657
658 // ----------------------------------------- 658 // ------------------------------------------------//
659 // Block 4 // 659 // Block 4 //
660 // ----------------------------------------- 660 // ------------------------------------------------//
661 661
662 const G4double outRadiusBlocco20mmIORT = 36. 662 const G4double outRadiusBlocco20mmIORT = 36.5 *mm;
663 const G4double innRadiusBlocco20mmIORT = 10. 663 const G4double innRadiusBlocco20mmIORT = 10. *mm;
664 const G4double hightBlocco20mmIORT = 3. *mm; 664 const G4double hightBlocco20mmIORT = 3. *mm;
665 const G4double startAngleBlocco20mmIORT = 0. 665 const G4double startAngleBlocco20mmIORT = 0.*deg;
666 const G4double spanningAngleBlocco20mmIORT = 666 const G4double spanningAngleBlocco20mmIORT = 360.*deg;
667 const G4double XPositionBlocco20mmIORT = -83 667 const G4double XPositionBlocco20mmIORT = -830. *mm;
668 668
669 solidBlocco20mmIORT = new G4Tubs("Blocco20mm 669 solidBlocco20mmIORT = new G4Tubs("Blocco20mmIORT", innRadiusBlocco20mmIORT,
670 outRadiusBlocco20mmIORT, 670 outRadiusBlocco20mmIORT,
671 hightBlocco20mmIORT, 671 hightBlocco20mmIORT,
672 startAngleBlocco20mmIORT, 672 startAngleBlocco20mmIORT,
673 spanningAngleBlocco20mmIORT); 673 spanningAngleBlocco20mmIORT);
674 674
675 G4LogicalVolume* logBlocco20mmIORT = new G4L 675 G4LogicalVolume* logBlocco20mmIORT = new G4LogicalVolume(solidBlocco20mmIORT,
676 Blocco20mmIORTMaterialIORT 676 Blocco20mmIORTMaterialIORT, "Blocco20mmIORT", 0, 0, 0);
677 677
678 physiBlocco20mmIORT = new G4PVPlacement(G4Tr 678 physiBlocco20mmIORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco20mmIORT),0.,0.)),
679 "Blocco20mmORT", logBlocco20mmIOR 679 "Blocco20mmORT", logBlocco20mmIORT, physicalTreatmentRoom, false, 0);
680 680
681 logBlocco20mmIORT -> SetVisAttributes(green) 681 logBlocco20mmIORT -> SetVisAttributes(green);
682 682
683 683
684 // -----------------------// 684 // -----------------------//
685 // Block 3 // 685 // Block 3 //
686 // -----------------------// 686 // -----------------------//
687 687
688 const G4double outRadiusBlocco3IORT = 36.5 * 688 const G4double outRadiusBlocco3IORT = 36.5 *mm;
689 const G4double innRadiusBlocco3IORT = 15. *m 689 const G4double innRadiusBlocco3IORT = 15. *mm;
690 const G4double hightBlocco3IORT = 3.5 *mm; 690 const G4double hightBlocco3IORT = 3.5 *mm;
691 const G4double startAngleBlocco3IORT = 0.*de 691 const G4double startAngleBlocco3IORT = 0.*deg;
692 const G4double spanningAngleBlocco3IORT = 36 692 const G4double spanningAngleBlocco3IORT = 360.*deg;
693 const G4double XPositionBlocco3IORT = -823.5 693 const G4double XPositionBlocco3IORT = -823.5 *mm;
694 694
695 695
696 solidBlocco3IORT = new G4Tubs("Blocco3IORT", 696 solidBlocco3IORT = new G4Tubs("Blocco3IORT", innRadiusBlocco3IORT,
697 outRadiusBlocco3IORT, 697 outRadiusBlocco3IORT,
698 hightBlocco3IORT, 698 hightBlocco3IORT,
699 startAngleBlocco3IORT, 699 startAngleBlocco3IORT,
700 spanningAngleBlocco3IORT); 700 spanningAngleBlocco3IORT);
701 701
702 G4LogicalVolume* logBlocco3IORT = new G4Logi 702 G4LogicalVolume* logBlocco3IORT = new G4LogicalVolume(solidBlocco3IORT,
703 Blocco3IORTMaterialIORT, " 703 Blocco3IORTMaterialIORT, "Blocco3IORT", 0, 0, 0);
704 704
705 physiBlocco3IORT = new G4PVPlacement(G4Trans 705 physiBlocco3IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco3IORT),0.,0.)),
706 "Blocco3ORT", logBlocco3IORT, phy 706 "Blocco3ORT", logBlocco3IORT, physicalTreatmentRoom, false, 0);
707 707
708 logBlocco3IORT -> SetVisAttributes(yellow); 708 logBlocco3IORT -> SetVisAttributes(yellow);
709 709
710 // -----------------------// 710 // -----------------------//
711 // Block 2 // 711 // Block 2 //
712 // -----------------------// 712 // -----------------------//
713 713
714 const G4double outRadiusBlocco2IORT = 41.5 * 714 const G4double outRadiusBlocco2IORT = 41.5 *mm;
715 const G4double innRadiusBlocco2IORT = 15. *m 715 const G4double innRadiusBlocco2IORT = 15. *mm;
716 const G4double hightBlocco2IORT = 8. *mm; 716 const G4double hightBlocco2IORT = 8. *mm;
717 const G4double startAngleBlocco2IORT = 0.*de 717 const G4double startAngleBlocco2IORT = 0.*deg;
718 const G4double spanningAngleBlocco2IORT = 36 718 const G4double spanningAngleBlocco2IORT = 360.*deg;
719 const G4double XPositionBlocco2IORT = -812. 719 const G4double XPositionBlocco2IORT = -812. *mm;
720 720
721 721
722 solidBlocco2IORT = new G4Tubs("Blocco2IORT", 722 solidBlocco2IORT = new G4Tubs("Blocco2IORT", innRadiusBlocco2IORT,
723 outRadiusBlocco2IORT, 723 outRadiusBlocco2IORT,
724 hightBlocco2IORT, 724 hightBlocco2IORT,
725 startAngleBlocco2IORT, 725 startAngleBlocco2IORT,
726 spanningAngleBlocco2IORT); 726 spanningAngleBlocco2IORT);
727 727
728 G4LogicalVolume* logBlocco2IORT = new G4Logi 728 G4LogicalVolume* logBlocco2IORT = new G4LogicalVolume(solidBlocco2IORT,
729 Blocco2IORTMaterialIORT, " 729 Blocco2IORTMaterialIORT, "Blocco2IORT", 0, 0, 0);
730 730
731 physiBlocco2IORT = new G4PVPlacement(G4Trans 731 physiBlocco2IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco2IORT),0.,0.)),
732 "Blocco2IORT", logBlocco2IORT, ph 732 "Blocco2IORT", logBlocco2IORT, physicalTreatmentRoom, false, 0);
733 733
734 logBlocco2IORT -> SetVisAttributes(red); 734 logBlocco2IORT -> SetVisAttributes(red);
735 735
736 // ----------------------- // 736 // ----------------------- //
737 // Block 1 // 737 // Block 1 //
738 // ----------------------- // 738 // ----------------------- //
739 739
740 const G4double outRadiusBlocco1IORT = 52.0 * 740 const G4double outRadiusBlocco1IORT = 52.0 *mm;
741 const G4double innRadiusBlocco1IORT = 15. *m 741 const G4double innRadiusBlocco1IORT = 15. *mm;
742 const G4double hightBlocco1IORT = 8.5 *mm; 742 const G4double hightBlocco1IORT = 8.5 *mm;
743 const G4double startAngleBlocco1IORT = 0.*de 743 const G4double startAngleBlocco1IORT = 0.*deg;
744 const G4double spanningAngleBlocco1IORT = 36 744 const G4double spanningAngleBlocco1IORT = 360.*deg;
745 const G4double XPositionBlocco1IORT = -795.5 745 const G4double XPositionBlocco1IORT = -795.5*mm;
746 746
747 solidBlocco1IORT = new G4Tubs("Blocco1IORT", 747 solidBlocco1IORT = new G4Tubs("Blocco1IORT", innRadiusBlocco1IORT,
748 outRadiusBlocco1IORT, 748 outRadiusBlocco1IORT,
749 hightBlocco1IORT, 749 hightBlocco1IORT,
750 startAngleBlocco1IORT, 750 startAngleBlocco1IORT,
751 spanningAngleBlocco1IORT); 751 spanningAngleBlocco1IORT);
752 752
753 G4LogicalVolume* logBlocco1IORT = new G4Logi 753 G4LogicalVolume* logBlocco1IORT = new G4LogicalVolume(solidBlocco1IORT,
754 Blocco1IORTMaterialIORT, " 754 Blocco1IORTMaterialIORT, "Blocco1IORT", 0, 0, 0);
755 755
756 physiBlocco1IORT = new G4PVPlacement(G4Trans 756 physiBlocco1IORT = new G4PVPlacement(G4Transform3D(rm4, G4ThreeVector((XPositionBlocco1IORT),0.,0.)),
757 "Blocco1IORT", logBlocco1IORT, ph 757 "Blocco1IORT", logBlocco1IORT, physicalTreatmentRoom, false, 0);
758 758
759 logBlocco1IORT -> SetVisAttributes(white); 759 logBlocco1IORT -> SetVisAttributes(white);
760 } 760 }
761 761
762 void Collimator60BeamLine::IortBeamLineJunctio 762 void Collimator60BeamLine::IortBeamLineJunctions()
763 { 763 {
764 764
765 765
766 G4double phi5 = 90. *deg; 766 G4double phi5 = 90. *deg;
767 767
768 768
769 G4RotationMatrix rm5; 769 G4RotationMatrix rm5;
770 rm5.rotateY(phi5); 770 rm5.rotateY(phi5);
771 771
772 // --------------------------------- // 772 // --------------------------------- //
773 // Junction 5 FINAL COLLIMATOR IORT // 773 // Junction 5 FINAL COLLIMATOR IORT //
774 // --------------------------------- // 774 // --------------------------------- //
775 775
776 const G4double outRadiusGiunz5FinalCollIORT 776 const G4double outRadiusGiunz5FinalCollIORT = 48.25 *mm;
777 const G4double innRadiusGiunz5FinalCollIORT 777 const G4double innRadiusGiunz5FinalCollIORT = 13.75 *mm;
778 const G4double hightGiunz5FinalCollIORT = 3. 778 const G4double hightGiunz5FinalCollIORT = 3.5 *mm;
779 const G4double startAngleGiunz5FinalCollIORT 779 const G4double startAngleGiunz5FinalCollIORT = 0.*deg;
780 const G4double spanningAngleGiunz5FinalCollI 780 const G4double spanningAngleGiunz5FinalCollIORT = 360.*deg;
781 const G4double Giunz5FinalCollXPositionIORT 781 const G4double Giunz5FinalCollXPositionIORT = -783.5 *mm;
782 782
783 solidGiunz5FinalCollIORT = new G4Tubs("Giunz 783 solidGiunz5FinalCollIORT = new G4Tubs("Giunz5FinalCollIORT", innRadiusGiunz5FinalCollIORT,
784 outRadiusGiunz5FinalCollIORT, 784 outRadiusGiunz5FinalCollIORT,
785 hightGiunz5FinalCollIORT, 785 hightGiunz5FinalCollIORT,
786 startAngleGiunz5FinalCollIORT, 786 startAngleGiunz5FinalCollIORT,
787 spanningAngleGiunz5FinalCollIORT); 787 spanningAngleGiunz5FinalCollIORT);
788 788
789 G4LogicalVolume* logGiunz5FinalCollIORT = ne 789 G4LogicalVolume* logGiunz5FinalCollIORT = new G4LogicalVolume(solidGiunz5FinalCollIORT,
790 Giunz5FinalCollMaterialIOR 790 Giunz5FinalCollMaterialIORT, "Giunz5FinalCollIORT", 0, 0, 0);
791 791
792 physiGiunz5FinalCollIORT = new G4PVPlacement 792 physiGiunz5FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz5FinalCollXPositionIORT),0.,0.)),
793 "Giunz5FinalCollIORT", logGiunz5F 793 "Giunz5FinalCollIORT", logGiunz5FinalCollIORT, physicalTreatmentRoom, false, 0);
794 794
795 logGiunz5FinalCollIORT -> SetVisAttributes(y 795 logGiunz5FinalCollIORT -> SetVisAttributes(yellow);
796 796
797 // --------------------------------- // 797 // --------------------------------- //
798 // Junction 4 FINAL COLLIMATOR IORT // 798 // Junction 4 FINAL COLLIMATOR IORT //
799 // --------------------------------- // 799 // --------------------------------- //
800 800
801 const G4double outRadiusGiunz4FinalCollIORT 801 const G4double outRadiusGiunz4FinalCollIORT = 42. *mm;
802 const G4double innRadiusGiunz4FinalCollIORT 802 const G4double innRadiusGiunz4FinalCollIORT = 13.75 *mm;
803 const G4double hightGiunz4FinalCollIORT = 8. 803 const G4double hightGiunz4FinalCollIORT = 8.5 *mm;
804 const G4double startAngleGiunz4FinalCollIORT 804 const G4double startAngleGiunz4FinalCollIORT = 0.*deg;
805 const G4double spanningAngleGiunz4FinalCollI 805 const G4double spanningAngleGiunz4FinalCollIORT = 360.*deg;
806 const G4double Giunz4FinalCollXPositionIORT 806 const G4double Giunz4FinalCollXPositionIORT = -771.5 *mm;
807 807
808 solidGiunz4FinalCollIORT = new G4Tubs("Giunz 808 solidGiunz4FinalCollIORT = new G4Tubs("Giunz4FinalCollIORT", innRadiusGiunz4FinalCollIORT,
809 outRadiusGiunz4FinalCollIORT, 809 outRadiusGiunz4FinalCollIORT,
810 hightGiunz4FinalCollIORT, 810 hightGiunz4FinalCollIORT,
811 startAngleGiunz4FinalCollIORT, 811 startAngleGiunz4FinalCollIORT,
812 spanningAngleGiunz4FinalCollIORT); 812 spanningAngleGiunz4FinalCollIORT);
813 813
814 G4LogicalVolume* logGiunz4FinalCollIORT = ne 814 G4LogicalVolume* logGiunz4FinalCollIORT = new G4LogicalVolume(solidGiunz4FinalCollIORT,
815 Giunz4FinalCollMaterialIOR 815 Giunz4FinalCollMaterialIORT, "Giunz4FinalCollIORT", 0, 0, 0);
816 816
817 physiGiunz4FinalCollIORT = new G4PVPlacement 817 physiGiunz4FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz4FinalCollXPositionIORT),0.,0.)),
818 "Giunz4FinalCollIORT", logGiunz4F 818 "Giunz4FinalCollIORT", logGiunz4FinalCollIORT, physicalTreatmentRoom, false, 0);
819 819
820 logGiunz4FinalCollIORT -> SetVisAttributes(b 820 logGiunz4FinalCollIORT -> SetVisAttributes(blue);
821 821
822 822
823 823
824 // --------------------------------- // 824 // --------------------------------- //
825 // Junction 3 FINAL COLLIMATOR IORT // 825 // Junction 3 FINAL COLLIMATOR IORT //
826 // --------------------------------- // 826 // --------------------------------- //
827 827
828 const G4double outRadiusGiunz3FinalCollIORT 828 const G4double outRadiusGiunz3FinalCollIORT = 42. *mm;
829 const G4double innRadiusGiunz3FinalCollIORT 829 const G4double innRadiusGiunz3FinalCollIORT = 0. *mm;
830 const G4double hightGiunz3FinalCollIORT = 4. 830 const G4double hightGiunz3FinalCollIORT = 4.25 *mm;
831 const G4double startAngleGiunz3FinalCollIORT 831 const G4double startAngleGiunz3FinalCollIORT = 0.*deg;
832 const G4double spanningAngleGiunz3FinalCollI 832 const G4double spanningAngleGiunz3FinalCollIORT = 360.*deg;
833 const G4double Giunz3FinalCollXPositionIORT 833 const G4double Giunz3FinalCollXPositionIORT = -758.75 *mm;
834 834
835 835
836 solidGiunz3FinalCollIORT = new G4Tubs("Giunz 836 solidGiunz3FinalCollIORT = new G4Tubs("Giunz3FinalCollIORT", innRadiusGiunz3FinalCollIORT,
837 outRadiusGiunz3FinalCollIORT, 837 outRadiusGiunz3FinalCollIORT,
838 hightGiunz3FinalCollIORT, 838 hightGiunz3FinalCollIORT,
839 startAngleGiunz3FinalCollIORT, 839 startAngleGiunz3FinalCollIORT,
840 spanningAngleGiunz3FinalCollIORT); 840 spanningAngleGiunz3FinalCollIORT);
841 841
842 G4LogicalVolume* logicsolidGiunz3FinalCollIO 842 G4LogicalVolume* logicsolidGiunz3FinalCollIORT = new G4LogicalVolume(solidGiunz3FinalCollIORT,
843 Giunz3FinalCollMaterialIOR 843 Giunz3FinalCollMaterialIORT, "Giunz3FinalCollIORT", 0, 0, 0);
844 844
845 physiGiunz3FinalCollIORT = new G4PVPlacement 845 physiGiunz3FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz3FinalCollXPositionIORT),0.,0.)),
846 "Giunz3FinalCollIORT", logicsolid 846 "Giunz3FinalCollIORT", logicsolidGiunz3FinalCollIORT, physicalTreatmentRoom, false, 0);
847 847
848 logicsolidGiunz3FinalCollIORT -> SetVisAttri 848 logicsolidGiunz3FinalCollIORT -> SetVisAttributes(yellow);
849 // logicsolidGiunz3FinalCollIORT -> SetVisAt 849 // logicsolidGiunz3FinalCollIORT -> SetVisAttributes (G4VisAttributes::GetInvisible());
850 850
851 851
852 852
853 // --------------------------------- // 853 // --------------------------------- //
854 // Junction 3 FINAL COLLIMATOR IORT internal 854 // Junction 3 FINAL COLLIMATOR IORT internal //
855 // --------------------------------- // 855 // --------------------------------- //
856 856
857 857
858 858
859 solidGiunz3FinalCollIntIORT = new G4Cons("Gi 859 solidGiunz3FinalCollIntIORT = new G4Cons("Giunz3FinalCollIntIORT",0.*mm,13.75*mm,0.*mm,22.25*mm,4.25*mm,0.*deg,360.*deg);
860 860
861 G4LogicalVolume* logicsolidGiunz3FinalCollIn 861 G4LogicalVolume* logicsolidGiunz3FinalCollIntIORT = new G4LogicalVolume(solidGiunz3FinalCollIntIORT,
862 Giunz3FinalCollMaterialInt 862 Giunz3FinalCollMaterialIntIORT, "Giunz3FinalCollIntIORT", 0, 0, 0);
863 863
864 physiGiunz3FinalCollIntIORT = new G4PVPlacem 864 physiGiunz3FinalCollIntIORT = new G4PVPlacement(0, G4ThreeVector(0.,0.,0.),"Giunz3FinalCollIntIORT", logicsolidGiunz3FinalCollIntIORT,physiGiunz3FinalCollIORT, false, 0);
865 865
866 logicsolidGiunz3FinalCollIntIORT -> SetVisAt 866 logicsolidGiunz3FinalCollIntIORT -> SetVisAttributes(yellow);
867 867
868 868
869 // --------------------------------- // 869 // --------------------------------- //
870 // Junction 2 FINAL COLLIMATOR IORT // 870 // Junction 2 FINAL COLLIMATOR IORT //
871 // --------------------------------- // 871 // --------------------------------- //
872 872
873 const G4double outRadiusGiunz2FinalCollIORT 873 const G4double outRadiusGiunz2FinalCollIORT = 42. *mm;
874 const G4double innRadiusGiunz2FinalCollIORT 874 const G4double innRadiusGiunz2FinalCollIORT = 22.25 *mm;
875 const G4double hightGiunz2FinalCollIORT = 5. 875 const G4double hightGiunz2FinalCollIORT = 5.75 *mm;
876 const G4double startAngleGiunz2FinalCollIORT 876 const G4double startAngleGiunz2FinalCollIORT = 0.*deg;
877 const G4double spanningAngleGiunz2FinalCollI 877 const G4double spanningAngleGiunz2FinalCollIORT = 360.*deg;
878 const G4double Giunz2FinalCollXPositionIORT 878 const G4double Giunz2FinalCollXPositionIORT = -748.75 *mm;
879 879
880 solidGiunz2FinalCollIORT = new G4Tubs("Giunz 880 solidGiunz2FinalCollIORT = new G4Tubs("Giunz2FinalCollIORT", innRadiusGiunz2FinalCollIORT,
881 outRadiusGiunz2FinalCollIORT, 881 outRadiusGiunz2FinalCollIORT,
882 hightGiunz2FinalCollIORT, 882 hightGiunz2FinalCollIORT,
883 startAngleGiunz2FinalCollIORT, 883 startAngleGiunz2FinalCollIORT,
884 spanningAngleGiunz2FinalCollIORT); 884 spanningAngleGiunz2FinalCollIORT);
885 885
886 G4LogicalVolume* logGiunz2FinalCollIORT = ne 886 G4LogicalVolume* logGiunz2FinalCollIORT = new G4LogicalVolume(solidGiunz2FinalCollIORT,
887 Giunz2FinalCollMaterialIOR 887 Giunz2FinalCollMaterialIORT, "Giunz2FinalCollIORT", 0, 0, 0);
888 888
889 physiGiunz2FinalCollIORT = new G4PVPlacement 889 physiGiunz2FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz2FinalCollXPositionIORT),0.,0.)),
890 "Giunz2FinalCollIORT", logGiunz2F 890 "Giunz2FinalCollIORT", logGiunz2FinalCollIORT, physicalTreatmentRoom, false, 0);
891 891
892 logGiunz2FinalCollIORT -> SetVisAttributes(r 892 logGiunz2FinalCollIORT -> SetVisAttributes(red);
893 893
894 // --------------------------------- // 894 // --------------------------------- //
895 // Junction 1 FINAL COLLIMATOR IORT // 895 // Junction 1 FINAL COLLIMATOR IORT //
896 // --------------------------------- // 896 // --------------------------------- //
897 897
898 const G4double outRadiusGiunz1FinalCollIORT 898 const G4double outRadiusGiunz1FinalCollIORT = 45. *mm;
899 const G4double innRadiusGiunz1FinalCollIORT 899 const G4double innRadiusGiunz1FinalCollIORT = 22.25 *mm;
900 const G4double hightGiunz1FinalCollIORT = 10 900 const G4double hightGiunz1FinalCollIORT = 10. *mm;
901 const G4double startAngleGiunz1FinalCollIORT 901 const G4double startAngleGiunz1FinalCollIORT = 0.*deg;
902 const G4double spanningAngleGiunz1FinalCollI 902 const G4double spanningAngleGiunz1FinalCollIORT = 360.*deg;
903 const G4double Giunz1FinalCollXPositionIORT 903 const G4double Giunz1FinalCollXPositionIORT = -733.*mm;
904 904
905 solidGiunz1FinalCollIORT = new G4Tubs("Giunz 905 solidGiunz1FinalCollIORT = new G4Tubs("Giunz1FinalCollIORT", innRadiusGiunz1FinalCollIORT,
906 outRadiusGiunz1FinalCollIORT, 906 outRadiusGiunz1FinalCollIORT,
907 hightGiunz1FinalCollIORT, 907 hightGiunz1FinalCollIORT,
908 startAngleGiunz1FinalCollIORT, 908 startAngleGiunz1FinalCollIORT,
909 spanningAngleGiunz1FinalCollIORT); 909 spanningAngleGiunz1FinalCollIORT);
910 910
911 G4LogicalVolume* logGiunz1FinalCollIORT = ne 911 G4LogicalVolume* logGiunz1FinalCollIORT = new G4LogicalVolume(solidGiunz1FinalCollIORT,
912 Giunz1FinalCollMaterialIOR 912 Giunz1FinalCollMaterialIORT, "Giunz1FinalCollIORT", 0, 0, 0);
913 913
914 physiGiunz1FinalCollIORT = new G4PVPlacement 914 physiGiunz1FinalCollIORT = new G4PVPlacement(G4Transform3D(rm5, G4ThreeVector((Giunz1FinalCollXPositionIORT),0.,0.)),
915 "Giunz1FinalCollIORT", logGiunz1F 915 "Giunz1FinalCollIORT", logGiunz1FinalCollIORT, physicalTreatmentRoom, false, 0);
916 916
917 logGiunz1FinalCollIORT -> SetVisAttributes(g 917 logGiunz1FinalCollIORT -> SetVisAttributes(gray);
918 } 918 }
919 919
920 void Collimator60BeamLine::IortBeamLineFinalCo 920 void Collimator60BeamLine::IortBeamLineFinalCollimator()
921 { 921 {
922 // -----------------------// 922 // -----------------------//
923 // FINAL COLLIMATOR IORT // 923 // FINAL COLLIMATOR IORT //
924 //------------------------// 924 //------------------------//
925 925
926 // const G4double OuterRadiusFinalCollimatorI 926 // const G4double OuterRadiusFinalCollimatorIORT = 35. *mm;
927 // const G4double innerRadiusFinalCollimatorI 927 // const G4double innerRadiusFinalCollimatorIORT = 30. *mm;
928 const G4double hightFinalCollimatorIORT = 33 928 const G4double hightFinalCollimatorIORT = 334. *mm;
929 const G4double startAngleFinalCollimatorIORT 929 const G4double startAngleFinalCollimatorIORT = 0.*deg;
930 const G4double spanningAngleFinalCollimatorI 930 const G4double spanningAngleFinalCollimatorIORT = 360.*deg;
931 const G4double finalCollimatorXPositionIORT 931 const G4double finalCollimatorXPositionIORT = -389.*mm;
932 932
933 933
934 934
935 935
936 G4double phi6 = 90. *deg; 936 G4double phi6 = 90. *deg;
937 937
938 938
939 G4RotationMatrix rm6; 939 G4RotationMatrix rm6;
940 rm6.rotateY(phi6); 940 rm6.rotateY(phi6);
941 941
942 942
943 solidFinalCollimatorIORT = new G4Tubs("Final 943 solidFinalCollimatorIORT = new G4Tubs("FinalCollimatorIORT", innerRadiusFinalCollimatorIORT,
944 OuterRadiusFinalCollimatorIORT, 944 OuterRadiusFinalCollimatorIORT,
945 hightFinalCollimatorIORT, 945 hightFinalCollimatorIORT,
946 startAngleFinalCollimatorIORT, 946 startAngleFinalCollimatorIORT,
947 spanningAngleFinalCollimatorIORT); 947 spanningAngleFinalCollimatorIORT);
948 948
949 G4LogicalVolume* logFinalCollimatorIORT = ne 949 G4LogicalVolume* logFinalCollimatorIORT = new G4LogicalVolume(solidFinalCollimatorIORT,
950 finalCollimatorMaterialIOR 950 finalCollimatorMaterialIORT, "FinalCollimatorIORT", 0, 0, 0);
951 951
952 physiFinalCollimatorIORT = new G4PVPlacement 952 physiFinalCollimatorIORT = new G4PVPlacement(G4Transform3D(rm6, G4ThreeVector((finalCollimatorXPositionIORT),0.,0.)),
953 "FinalCollimatorIORT", logFinalCo 953 "FinalCollimatorIORT", logFinalCollimatorIORT, physicalTreatmentRoom, false, 0);
954 954
955 // logFinalCollimatorIORT -> SetVisAttribut 955 // logFinalCollimatorIORT -> SetVisAttributes(G4VisAttributes::GetInvisible());
956 logFinalCollimatorIORT -> SetVisAttributes(b 956 logFinalCollimatorIORT -> SetVisAttributes(blue);
957 } 957 }
958 958
959 ////////////////////////////////////////////// 959 /////////////////////////////////////////////////////////////////////////////
960 /////////////////////////// MESSENGER //////// 960 /////////////////////////// MESSENGER ///////////////////////////////////////
961 ////////////////////////////////////////////// 961 /////////////////////////////////////////////////////////////////////////////
962 962
963 963
964 void Collimator60BeamLine::SetInnerRadiusFinal 964 void Collimator60BeamLine::SetInnerRadiusFinalCollimatorIORT(G4double value)
965 { 965 {
966 solidFinalCollimatorIORT -> SetInnerRadius(v 966 solidFinalCollimatorIORT -> SetInnerRadius(value);
967 G4RunManager::GetRunManager() -> GeometryHas 967 G4RunManager::GetRunManager() -> GeometryHasBeenModified();
968 G4cout<<"Inner Radius of the final collimato 968 G4cout<<"Inner Radius of the final collimator IORT is (mm):"
969 << solidFinalCollimatorIORT -> GetInnerRadiu 969 << solidFinalCollimatorIORT -> GetInnerRadius()/mm
970 << G4endl; 970 << G4endl;
971 } 971 }
972 972
973 ////////////////////////////////////////////// 973 /////////////////////////////////////////////////////////////////////////
974 974
975 void Collimator60BeamLine::SetOuterRadiusFinal 975 void Collimator60BeamLine::SetOuterRadiusFinalCollimatorIORT(G4double value)
976 { 976 {
977 solidFinalCollimatorIORT -> SetOuterRadius(v 977 solidFinalCollimatorIORT -> SetOuterRadius(value);
978 G4RunManager::GetRunManager() -> GeometryHas 978 G4RunManager::GetRunManager() -> GeometryHasBeenModified();
979 G4cout<<"Outer Radius of the final collimato 979 G4cout<<"Outer Radius of the final collimator IORT is (mm):"
980 << solidFinalCollimatorIORT -> GetOuterRadiu 980 << solidFinalCollimatorIORT -> GetOuterRadius()/mm
981 << G4endl; 981 << G4endl;
982 } 982 }
983 983
984 984
985 ////////////////////////////////////////////// 985 /////////////////////////////////////////////////////////////////////////////
986 986
987 987
988 988
989 989